Unplugging the Showerhead

 575-937-4385​Unplugging the Showerhead
 
Isn’t a nice, hot shower a wonderful thing? Whether you get up in the morning and shower to prepare for the morning or stand under the hot welcoming spray at the end of a long day at work… a shower can not only clean but also refresh.
 
But then, over time, the shower experience starts to fade. You aren’t sure why. You use the same shampoo. The water still seems hot, the exact temperature you like. Then… you figure it out. The water just isn’t coming out of the showerhead like it used to? That’s right. Your showerhead has an issue. Something is wrong. The water flow just isn’t there like in the past.
 
Showerheads have small holes in them that create those tiny strong streams of water. We know this. We also know that when you plug a hole, nothing comes out. With showerheads, it’s not like all the holes get plugged up at once. It happens over time. Mineral deposits natural in all water just builds up.
 
Here's how you fix this issue.
 
If you have a smaller profile showerhead, some have found a really easy way to do this. Simply get a small bowl of white vinegar and hold it up and immerse the showerhead in the liquid. You will have to hold this pose for a while, several minutes at minimum. Since some clogs are at the tips of the showerhead holes, the vinegar just might dissolve the minerals. It can’t hurt to try this method. All you are looking to do is dissolve the minerals, and vinegar as an acid solution will do it.
 
If that doesn’t work, it’s time to take things apart. Using the proper tools, which may include a wrench or pliers, and be sure not to scratch any of the finish on the showerhead, remove it from the pipe. Take it all apart. There should be parts inside, such as a small filter. Get it all apart and then soak it all in a vinegar solution. Give it plenty of time, and since you aren’t holding a bowl awkwardly above your head, maybe a couple of hours. Before, during, and after this process, inspect the holes. You may need to poke them with a safety pin, to help physically remove some of the deposits.
 
If vinegar doesn’t work, a stronger solution made for removing mineral deposits can be used but be sure to wear safety gloves and eye protection if you do this. The same procedures can be followed as already detailed.
 
Of course, for all your cleaning needs and advice, do the right thing. Call your favorite cleaning company. After all, it pays to call a pro! 575-937-4385